17a6eb6b39
The POS895 does not answer Epson's ENPC broadcast, so PrintServer never
registers it and every job for it fails with "Printer not found". The
feasibility notes listed the vendor's own discovery protocol as unknown
and expected a packet capture to recover it, which is what this does.
Captured pktmon traffic while running the vendor EasySet tool on the
printer's segment. The protocol is:
query UDP broadcast 255.255.255.255:3289, sent FROM source port 9100
53 50 52 54 2D 49 6E 66 6F 72 00 00 0D "SPRT-Infor" 00 00 0D
reply from <printer>:3289 back to <querier>:9100, 39 ASCII bytes
"28-0e-8b-3d-ca-f1 2608120478"
MAC, 17 chars 12 spaces serial, 10 chars
The printer's address is the reply's source IP. Pos895Test now sends this
probe and parses the replies; run against the real printer it returns the
same MAC and serial the vendor tool got, so the reimplementation matches.
Two useful side effects. Port 3289 is the same UDP port ENPC uses, so a
composite IDiscoveryService can share one socket. And the querying machine
and the printer sat in different /24s of one flat segment, so the /24 TCP
sweep the notes originally preferred would have missed this printer.
The print test is commented out at the bottom of Program.cs rather than
deleted; it confirmed Font A is 48 columns and that GS ! magnification
works at width 1x/2x/3x with height 2x.
Notes updated: the discovery work item is no longer the largest one, the
compatibility table records DLE EOT and GS ! as confirmed and ESC d as
apparently ignored, and the answered questions are separated from the
ones still open.
Claude-Session: https://claude.ai/code/session_01E6N3P4nSZLtp4BC2LXVref
Packet captures
easyset.pcapng / easyset.etl
pktmon capture taken on 2026-09-03 on a machine on the POS895's network
segment, while running the vendor's EasySet Tool.exe and clicking its scan.
Taken to reverse engineer the vendor discovery protocol, since the POS895 does
not answer Epson's ENPC broadcast and the EasySet binary yields no readable
strings. The resulting wire format is written up under "SPRT discovery protocol"
in POS895_POS896_integration_notes.md and implemented in Pos895Test.
easyset.etl is the raw pktmon output; easyset.pcapng is the converted form
and the one worth opening.
What is in it:
10.1.250.71:9100 -> 255.255.255.255:3289theSPRT-Infordiscovery query10.1.252.219:3289 -> 10.1.250.71:9100the printer's MAC + serial reply10.1.252.148:58165 -> 255.255.255.255:3289an EpsonEPSONQbroadcast that the POS895 does not answer, which is the point- unrelated noise: Ubiquiti AP beacons on UDP 10001, SSDP, mDNS, NetBIOS
Note pktmon records each frame several times, once per stack layer, so every packet appears about six times.