EugeneTes ac72e9ac4e add a POS895 target to EpsonTest that prints via the IPrinter adapter ...

EpsonTest predates the adapter layer: PrintCommandsToEpsonPrinterAsync
takes an EpsonPrinter and drives it directly, so PrinterWrapperFactory,
the model adapters and the 0x20 dispatch were never exercised. Against a
POS895 that path feeds with ESC d, which the firmware ignores, so every
cut slices through the last printed line, and it never sends a logo at
all - the only logo branch is the HTML one, which uses GS ( L, the
command that prints nothing on this hardware.

PrintCommandsViaAdapterAsync instead does what EpsonPrintService does for
a real job: query GS I 1, let PrinterWrapperFactory choose the adapter
from the reported byte, then print the logo and commands through it and
cut. It logs the reported id and the chosen adapter, so a wrong or
missing model byte is visible rather than silent.

Menu gains a third target and the non-interactive form accepts "pos895",
so `dotnet run -- final pos895` prints a Final receipt with its logo
through the production path. That covers the one part of the POS895 work
nothing had executed end to end: the ESC * bit-image logo.

Note EpsonTest must be run from its own directory; the logo paths are
relative and `dotnet run --project` from the repo root cannot resolve
them. That predates this change.

Claude-Session: https://claude.ai/code/session_01E6N3P4nSZLtp4BC2LXVref

2026-09-03 13:34:02 +02:00

2.8 KiB

300x150px

Raw History